Learn How To Make A Chicken Plucker
Learn How To Make A Chicken Plucker
By Helene Norris
It is necessary to learn how to make a chicken plucker in order to cut down the coast. Especially those who keep chickens. The procedure for making homemade pluckers is simple and the materials involved in the making are readily available within our reach. First, it is sensible to consider how it works before embarking on the procedure of making it. This simple machine is used to help in the plucking of the feathers of a chicken. It always has a mortar which rotates the feather plate and the feathers plate is fitted with rubber fingers which do the actual plucking when rotated.
It is worth noting that there are several types of chicken plucker. There are some which are bought while there are some which are home made. It is also important to note that they are of different sizes depending on the number of chicken they can pluck at the same time. The one discussed in this article is a homemade and a simple one which cannot pluck many chickens at the same time. Though the idea of making is the same, one can decide which size they wish to make depending on the size of the poultry farm.
There are certain materials which must be made available before embarking on the process of making it. Some of the materials include the following. The rubber fingers, pieces of timber, nails, feather plate, a barrel and a mortar.
The first stage is to construct a frame using the pieces of wood. The frame should be made in a way that the barrel fits inside it. If the barrel is big, then it applies that the wood frame must be big. On the other hand if the barrel is small, then the frame must also be small. What is important is that the barrel must fit inside the wood frame to protect it.
After identifying the suitable area, a timber frame is then constructed in the place. The size of the frame should be proportionate to the size of the available barrel as well as the size of the desired plucker. The barrel is then fitted in to the frame which holds it firmly.
The plate is then drilled using a driller to create several holes on the surface. The number of holes depends on the numbers of available rubber fingers. What is significant is to ensure that the rubber fingers are properly fitted. This is because the plate is the one which plucks the feathers.
The feather plate is then fixed at the bottom of the barrel. The next thing to do is to prepare a belt and pulley system. The belt and pulley system may be bought or improvised from the materials available locally. The belt and the pulley system is used to rotate the feather plate. The system is connected to an electric mortar. The electric mortar is used to rotate the feather plate through the use of the belt and pulley system.
The last step after doing the connection is to prevent the soup from splashing. It is therefore necessary to fix a plash guard on the barrel. The splash guard will prevent the soup from splashing all over. If these steps are properly followed practically, then one can be sure that they have learned on how to make a chicken plucker.
It is worth noting that there are several types of chicken plucker. There are some which are bought while there are some which are home made. It is also important to note that they are of different sizes depending on the number of chicken they can pluck at the same time. The one discussed in this article is a homemade and a simple one which cannot pluck many chickens at the same time. Though the idea of making is the same, one can decide which size they wish to make depending on the size of the poultry farm.
There are certain materials which must be made available before embarking on the process of making it. Some of the materials include the following. The rubber fingers, pieces of timber, nails, feather plate, a barrel and a mortar.
The first stage is to construct a frame using the pieces of wood. The frame should be made in a way that the barrel fits inside it. If the barrel is big, then it applies that the wood frame must be big. On the other hand if the barrel is small, then the frame must also be small. What is important is that the barrel must fit inside the wood frame to protect it.
After identifying the suitable area, a timber frame is then constructed in the place. The size of the frame should be proportionate to the size of the available barrel as well as the size of the desired plucker. The barrel is then fitted in to the frame which holds it firmly.
The plate is then drilled using a driller to create several holes on the surface. The number of holes depends on the numbers of available rubber fingers. What is significant is to ensure that the rubber fingers are properly fitted. This is because the plate is the one which plucks the feathers.
The feather plate is then fixed at the bottom of the barrel. The next thing to do is to prepare a belt and pulley system. The belt and pulley system may be bought or improvised from the materials available locally. The belt and the pulley system is used to rotate the feather plate. The system is connected to an electric mortar. The electric mortar is used to rotate the feather plate through the use of the belt and pulley system.
The last step after doing the connection is to prevent the soup from splashing. It is therefore necessary to fix a plash guard on the barrel. The splash guard will prevent the soup from splashing all over. If these steps are properly followed practically, then one can be sure that they have learned on how to make a chicken plucker.
About the Author:
You can visit the website www.powerplucker.com for more helpful information about Finding Out On How To Make A Chicken Plucker
#end
Post a Comment